Dukic Logo

K-Tech Banner


2016 WP Bladder Conversion

 After some confusion on what is needed to fit our WP reservoir bladder conversions available for the 2016 models listed below. we have listed the tools that are needed below to remove the original reservoir and fit the K-Tech option.

Available for Following Models:-

  • KTM SX125
  • KTM SX150
  • KTM SX250F
  • KTM SX350F
  • KTM SX450F
  • KTM XC250F
  • Husqvarna TC125
  • Husqvarna FC250
  • Husqvarna FC350
  • Husqvarna FC450

K-Tech FF Fitments

Part Number:- 211-900-100>

To fit these part you will need the tools listed below!

K-Tech FF Fitments

Original reservoir removal tool

Part Number:- 213-211-200

K-Tech FF Fitments

Gedore Friction rachet for clamping the new reservoir.

Part No:- 213-211-190

K-Tech FF Fitments

65mm insert for Gedore rachet tool.

Part Number:- 213-211-195

 With the Bladder conversion installed creating better comfort for the rider and less fade, Its important you have the correct spring rate for your customer. Our high quality springs for the rear shock will compliment the new Bladder conversion offering the perfect balance for rider and motorcycle. K-Tech Shock springs are manufactured from the highest grade chrome silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length, they then have phosphate coating applied to protect against rust and then powder coated.

K-Tech FF Fitments

K-tech Suspension Ltd and the K-tech Suspension Ltd Logo are registered trademarks of K-tech Suspension Ltd.
K-Tech Suspension | Unit 1 & 2 Marquis Court | Rawdon Business Park | Moira | Derbyshire | DE12 6EJ